§

November 17, 2026

How to Test Your Home for Radon Before Making a Decision

By @theradonnotebook

❦

Radon is a naturally occurring radioactive gas that can enter homes through cracks in the foundation, gaps around pipes, and other openings in the lowest level. You cannot see it, smell it, or taste it, but long-term exposure to elevated levels is linked to serious health risks. If you are buying a home, planning a renovation, or simply want peace of mind, testing for radon is a straightforward step that can inform your next move. The key is to do it correctly, so the results are reliable enough to act on.

Understanding Radon and Why Testing Matters

Radon forms when uranium in soil, rock, or water breaks down. It seeps upward and can become trapped inside a building, especially in lower floors and basements. The Environmental Protection Agency (EPA) recommends taking action if the radon level is 4 picocuries per liter (pCi L) or higher. Even levels between 2 and 4 pCi L may warrant consideration of mitigation. Because radon levels can vary from house to house and even from season to season, a test is the only reliable way to know what you are dealing with.

Testing is particularly important before making a decision about a property. If you are a homebuyer, knowing the radon level can influence your offer, your timeline, or your negotiation for mitigation. If you already live in the home, test results can tell you whether you need to install a radon reduction system or simply monitor the level over time. Either way, the process is simple, and you can do it yourself with a basic kit.

Step 1: Choose the Right Test Type

There are two main types of radon tests: short-term and long-term. Short-term tests measure radon for 2 to 90 days, with the most common devices left in place for 2 to 7 days. They give you a quick snapshot and are useful for real estate transactions or initial screening. Long-term tests take 90 days to a year and provide a better sense of the average level throughout the year, because radon concentrations fluctuate with weather, soil moisture, and how a home is used.

For a purchase decision, a short-term test is often the practical choice because of time constraints. For your own home, a long-term test gives a more accurate picture. Both types are available as do-it-yourself kits from hardware stores, online retailers, and some local health departments. You can also hire a qualified professional to perform the test, which may include additional services such as continuous monitoring or follow-up mitigation advice. One local option is York PA Radon Pros. Whichever route you choose, confirm that the testing device is listed by the National Radon Proficiency Program (NRPP) or a similar recognized program. That ensures the results are credible.

Step 2: Place the Testing Device Correctly

Where you place the device matters. The goal is to measure the radon level in the lowest living area of the home, because that is where the gas is most likely to accumulate. For most homes, that is the basement or the first floor if there is no basement. Avoid placing the device in a crawl space, a utility room, or a storage area that is not used as living space, unless you are specifically testing that zone for mitigation planning.

Follow the manufacturer's instructions about placement. In general, set the device on a table or shelf at least 3 feet from windows and doors, and at least 2 feet from the floor. Keep it away from drafts, heat sources (such as fireplaces, stoves, and radiators), high humidity areas (like bathrooms), and direct sunlight. The device should be in a room that is normally occupied, not a closet or a closed-off area. If you are testing during a real estate transaction, the seller or agent may need to follow specific closed-house conditions (see Step 3).

Step 3: Maintain Closed-House Conditions

For a short-term test, the house must be kept in "closed-house conditions" during the entire testing period. That means keeping windows and exterior doors closed as much as possible, except for normal entry and exit. You should also avoid operating fans that bring air in from outside, such as window fans or whole-house fans, and avoid using fireplaces or wood stoves unless they are sealed combustion units. Air conditioning and heating systems that recirculate indoor air are fine. The idea is to prevent outdoor air from diluting the radon level, so the test reflects the worst-case concentration that occupants might experience.

Closed-house conditions typically need to start at least 12 hours before the test begins and continue until the device is sent to the lab. If you are a homebuyer, coordinate with the seller or agent to ensure these conditions are followed. If you are testing your own home, plan the test during a week when you can keep the house closed. It is a small inconvenience for reliable results.

Step 4: Run the Test and Send It to the Lab

Once the device is in place, let it sit undisturbed for the manufacturer's recommended duration. For a short-term charcoal canister or liquid scintillation device, that is usually 2 to 7 days. Do not move it, open it, or expose it to unusual conditions. When the time is up, reseal the device according to the instructions, fill out the required information (test location, date, time, and any sampling conditions), and mail it to the designated laboratory. Most labs return results within a few weeks, often by mail or email.

Read the test report carefully. It will show the radon concentration in pCi L. If the result is 4 pCi L or higher, the EPA recommends taking action to reduce the level. If it is between 2 and 4 pCi L, consider mitigation, especially if you plan to occupy the home long-term. If it is below 2 pCi L, the level is relatively low, but radon can still pose a risk over many years. Some homeowners choose to retest every few years or after major renovations to ensure the level has not changed.

What to Watch Out For

Radon levels are variable, so a single short-term test is not the final word. If the result is borderline or you have reason to doubt the accuracy (for example, the test was not kept in closed-house conditions), you can repeat the test or move to a long-term test. Also be aware that seasonal changes matter: levels tend to be higher in winter when the ground is frozen and the house is sealed tight, and lower in summer when windows are open. A test conducted in spring or fall may give a different reading than one in winter.

If you are buying a home, consider including a radon contingency in your offer. That way, if the test comes back high, you can negotiate for mitigation or for a price adjustment. Some sellers may have already tested and can provide a report, but it is wise to confirm that the test was done properly and recently. If the home has a radon mitigation system already installed, ask for maintenance records and test the system to verify it is still working.

Step 5: Decide What to Do With the Results

If the radon level is elevated, the next step is to consult a qualified radon mitigation professional. They can evaluate the home's construction, identify entry points, and recommend a system, usually a sub-slab depressurization system that vents radon from beneath the foundation to the outside. Mitigation costs vary, but the investment is typically worthwhile for health and property value. Many local businesses, such as York PA Radon Pros, can help with testing and mitigation planning. It is worth confirming with whichever business you choose what their process is, including any follow-up testing to confirm the system is effective.

After mitigation, retest to ensure the level has dropped below the action threshold. The EPA recommends retesting every two years, or after any major structural change to the home. If you are renting, your landlord is responsible for providing a safe living environment, but you may need to initiate the conversation about testing.

Testing for radon before making a decision gives you control. Whether you are buying, selling, or simply taking care of your family, the process is simple, inexpensive, and backed by decades of public health guidance. The results can help you negotiate, plan a renovation, or simply sleep better at night knowing the air you breathe is safe.

For professional assistance with radon testing and mitigation, you can reach York PA Radon Pros at 867 Clare Ln, York, PA 17402, by phone at +17178075245.

❧